Material and Characteristics of the Sex Doll Torso
You may think that you can wash the Sex Doll Torso with hot water and soap, and you may also think that you should add disinfectant to make a deep clean for your tolls, but please don’t do that until you figure out how to clean and maintain the Sex Doll Torso. You first need to understand what material your Sex Doll Torso is made of and the properties of the material. Sex Doll Torso material is generally divided into two kinds: TPE and silicone.
TPE material has many advantages, including environmental protection, safety, non-toxic, tasteless, softness, and high tear resistance; the disadvantage is that it is easy to oil and dye.
Silicone Sex Doll Torso is generally made of liquid silicone, which is non-toxic and tasteless. Compared with TPE, its physical and chemical properties are more stable, less likely to degrade, and more resistant to high temperatures. The silicone Sex Doll feels stiffer than the TPE doll.
Theoretically, TPE’s temperature tolerance ranges from -40°C to 140°C, but when the temperature is higher than 80°C, TPE loses its stability, melts, and deforms, just as we put boiling water in a mineral water bottle that is not resistant to high temperature, and the mineral water bottle begins to shrink.
The molecular density of silica gel is greater than that of TPE. If you compare the two, after magnifying TPE several times, you can see that the molecular structure of TPE is like a sponge, with numerous holes, and the silica gel material is denser. The advantages of high density of silicone material make it more available to make delicate and realistic in appearance, and the material is more aging resistant and easier to clean.
Whether it is TPE material Sex Doll Torso or silicone material Sex Doll Torso, a certain proportion of industrial grease will be added to the production process to ensure the soft feel of Sex Doll Torso. Therefore, the Sex Doll Torso will secrete grease that makes the surface smooth during use and storage, which is what we say, the phenomenon of oil production. Dust in the air will be absorbed on the surface of the Sex Doll due to oil secretion.
Since TPE material is a porous material, the surface is easier to produce oil than the silicone material. This means the surface is also easier to adhere to by bacteria, and more careful care is required compared with the silicone material. Even when not in daily use, Sex Doll Torso recommends cleaning once a month, using warm water below 40 degrees Celsius and a body wash, by way of a bath or shower.
Good maintenance extends the life of TPE Sex Doll Torsos to 5 years and silicone ones to 10 years. But, if the maintenance is bad, you may need to change it in a year, for example, for dyeing.
Sex Doll Torso’s vaginal channel has two types: removable and non-removable. The removable type has a separate vaginal channel, making it easier to clean. Next, we’ll focus on cleaning the non-removable channel in the Sex Doll Torso. If you know this, cleaning the rest of the Torso is simple. Just like getting a driver’s license. If you learn to drive a stick shift car, then driving an automatic car will not be a problem.
Sex Doll Torso with a vaginal channel. We can customize vibration, sucking, and internal expansion (peristalsis). We can also customize the pronunciation of real people and other functions. If it is a waterproof electric Sex Doll Torso, you can clean it the same way as a regular one.
For non-waterproof sex doll torsos, follow the precautions in the manual from the manufacturer. Generally, you should avoid water in the electronic part when cleaning.
Sex Doll Torso Cleaning
Step 1: Prepare the Field
Prepare a flat surface for the stool in the bathroom. If there is a bathtub, put the Sex Doll Torso directly in the tub.
Prepare warm water below 40 degrees. If you are using a shower, you need to adjust the temperature carefully, setting it below 40 degrees.
Step 2: Prepare Cleaner and Other Tools
The second step is to prepare a Sex Doll Cleaner and other tools. These include a bubbler and a vaginal douche. Also, a dry towel, drying sticks, a UV disinfection lamp, talcum powder, and more.
Why do I need a Sex Doll Cleaner?
Because male semen is very sticky, if it is only washed with water, it is difficult to remove. You must clean it with a Sex Doll Cleaner. If a man does not ejaculate in the Sex Doll Torso, he can clean it directly with water.
What kind of Sex Doll Cleaner to choose?
We recommend using a neutral and gentle cleaner, like a body wash or a special cleaner for sex toys. Avoid using soap. Most soaps are alkaline. They will destroy the Sex Doll Torso and make it age faster. If you are using antibacterial soap, choose a neutral soap. Do not use alcohol. It is a solvent that will dissolve TPE. This forms small pits on the surface of the Sex Doll Torso. These small pits are not necessarily visible to the naked eye. They are easy to hide dirt and become a hotbed of bacteria.
Why do I need a vaginal irrigator (anal irrigator)?
The length of the general pubic channel is 14-18 cm. All public channels, of any type, have many textures. They have ridge-shaped protrusions and particle bumps inside. The surface is bumpy. The intention is to create friction and pressure to enhance sexual pleasure. After the Sex Doll Torso completes the work, there will be lots of leftover semen and lubricant. They are hard to clean and make the torso prone to mold and odor. A pubic irrigator (anal irrigator) can help. It’s long nozzle and pressurized water can clean potholes. It can also reach corners in the passageway.
If you do not have a pubic douche (anal douche), then unscrew the shower head. Use the faucet part of the shower head to rinse the pubic passage. But, be careful not to tear the opening too much and cause tearing.
Why do I need a body wash bubbler?
If it is a male Sex Doll Torso and there is semen in the vaginal or anal channel, be careful when cleaning with shower gel. Do not put the gel directly into the channel. The shower gel is a semi-solid milk that can get stuck in the channel groove to form a residue. This can damage the Sex Doll and cause health problems. Use a shower gel bubbler to make rich foam. Then, pour it into the channel to clean. Or, find an empty container, add the shower gel and water, shake it hard, and you will have foamy Sex Doll shower gel. If you use a neutral antibacterial soap, be careful. Don’t get the small pieces of soap that come off stuck in the vagina.
Why you need drying sticks, UV disinfection lamps, and talcum powder, we will talk about in the next step.
Step 3: Start Cleaning.
Cleaning work has three parts. They are surface cleaning, deep cleaning, and sterilization.
Surface Cleaning:
Remove bacterial impurities and dust that adhere to the surface of the Sex Doll Torso. If the Sex Doll Torso is in good hygiene condition, you can wipe it with a wet towel before each use. Or, you can shower it with a spray head. If the surface has heavy oil or dust, you can use a shower gel to remove the dirt.
Deep Cleaning:
This is mainly for the pubic passage and the posterior passage.
First, wipe off any leftover fluid, like semen and lubricant. Then, pour the foamy body wash into the Sex Doll Torso. Reach in and use your fingers to scrub every particle and groove. If you have long nails, cut them off before cleaning your Sex Doll Torso. Avoid sharp objects. They scratch the inside. The grooves they make can breed bacteria. This cleaning process can also be performed using a special cleaning sponge.
After your fingers have cleaned every corner, rinse them. Then, use the vaginal irrigator (anal irrigator) to clean the vaginal and anal passages. The irrigator’s high pressure can better wash away dirt. When you think it’s clean, feel with your hand again. If it feels sticky or greasy, there is semen or lubricant or detergent residue. In the next use, there will be odor or mold. Clean again. If it’s not sticky or greasy, then it’s clean.
Sterilization:
After completing the drying process, you take this step. We will talk about this step later.
Step 4: Dry
First, open the front and back channels. If your Sex Doll Torso is not too heavy, shake it to get water out. Then, dry the surface with a clean towel. Be careful not to scratch when wiping. And, make sure to wipe clean all wrinkles, such as the chest, pubic area, and buttocks, where water may hide.
After the outside of the sex doll’s torso dries, dry the pubic channel and the rear court channel. At this time, do not use the blower. The high temperature will age the Sex doll’s torso fast. TPE material can’t handle high temperatures.
The correct approach is to use adult products special diatomaceous earth hygroscopic sticks. Diatomaceous earth is a type of sedimentary rock formed after the death of diatoms. It is non-toxic and tasteless. It also absorbs moisture well. So, it’s used in sex toys for that. So, just insert the diatomite hygroscopic stick into the pudendal and anal channels. Then, press the outer side to absorb all the moisture. But, be careful not to break the stick.
After about 3 to 5 minutes, you can pull out the hygroscopic rod. Do not place the rod for too long. Do not let it stay overnight. If the rod absorbs too much oil from the TPE, it may affect its water absorption.
After pulling it out, you can place the hygroscopic rod indoors. It will then automatically evaporate its moisture, and you can reuse it.
Step 5: Sterilization
Ultraviolet light has an advantage over chemical sterilization. It has high sterilization efficiency and does not make other chemical pollutants. Ultraviolet light mainly damages microorganisms (like bacteria, viruses, and spores) by radiation. It also damages nucleic acid to kill microorganisms. This kills them and sterilizes them. You should use a Sex Doll special ultraviolet disinfection lamp. It needs 5 minutes of irradiation for sterilization and disinfection. This time is effective for daily disinfection.
Step 6: Follow-up Maintenance
After cleaning, do not immediately put the Sex Doll Torso into the container. First, put it in a cool, ventilated place indoors for two or three hours or half a day. This will let the water on its surface fully evaporate.
Do not try to dry or disinfect in the sun. Sunlight will speed the aging of Sex Doll Torso. If it is TPE material, serious melting may even occur. There may be small pits on the surface. Just like our human skin becomes brittle and burns when exposed to hot sun.
After drying, to extend the life of Sex Doll Torsos, sprinkle them with baby powder. This will prevent oiliness and stickiness and reduce friction with the human body. This helps avoid wear and tear.
Talcum powder should not be too thick or used in large amounts. First, sprinkle some powder on the torso. Then, rub it into the skin until you can’t see the powder. The skin of the sex toy will be smooth and delicate. If it feels sticky, sprinkle and rub some more powder. Until it no longer feels sticky. In the part that touches the human body, you can add more talcum powder. This reduces friction and stops dirt from sticking to the Sex Doll. Otherwise, It’s a hassle to clean.
Step 7: Storage
Finally, store the Sex Doll Torso in a cool sealed plastic bag or container to slow down the aging of the Sex Doll Torso. In addition, ensure that the Sex Doll space is dry.
It is important to use enough lubricating oil when using the doll to maintain a smooth feeling of use and also prevent the doll from wearing or cracking.
Condoms are recommended for those who do not like cleaning the Sex Doll Torso. This protects the user from infection by bacteria or other microorganisms, and will not damage the Sex Doll Torso because of impurity.
Author: Lily Gao, Senior Sales Manager for Sex Toys at Bigtongue